- 4.5" K Style VINYL GUTTER
- Gutter Size: 4.5 inch
- Pipe Size: 2.5 inch square
- Colors: White, Dark Brown
- Availability:Stock
Plastmo Inc. PLANNING FORM
|
|
| Part | Description | Stock# | |
| Gutter 10 foot | 10ft.(3 m) lengths. May be cut to fit any size | K0140* | - |
| Joint Connector | For joining gutter sections | K0240* | - |
| Expansion Joint Connector | Must be used on any side where there is 25feet(7.6m) or more between two corner components and no expansion center drop. Allows for free expansion of gutter. | K0340* | - |
| Outside Corner 90 deg. | For exterior corner joining of gutter sections. | K0440* | - |
| Inside Corner 90 deg. | For internal corner joining of gutter sections. | K0540* | - |
| Vinyl Bracket | Firmly supports gutter sections from top while allowing for free expansion. One required for every 24" of gutter. Do Not Cement. | K0640* | - |
| End Cap (2/bag R-L) | For capping open ends of gutter. Right and Left in pair. Also fits expansion center drop. | K0840* | - |
| Expansion Center Drop SQ | Allows for free thermal expansion of gutter while providing outlet to downpipe. One required for each downpipe assembly. Do Not Cement. | K0942* | |
| Expansion Center Drop RD2 | Allows for free thermal expansion of gutter while providing outlet to downpipe. One required for each downpipe assembly. Do Not Cement. For round 2.5" pipe. | K1142* | |
| Expansion Center Drop RD3 | Allows for free thermal expansion of gutter while providing outlet to downpipe. One required for each downpipe assembly. Do Not Cement. for round 3" pipe. | K1143* | - |
| Elbow 75 deg. | To bring downpipe from the fascia overhang to wall, two are required for each downpipe assembly. Third may be used at base of downpipe. Do Not Cement. | K1202* | - |
| Downspout bracket | For securing downpipe to the wall. Use two for each length of downpipe. Lower bracket must terminate on elbow or pipe joint.Do Not Cement | K1402* | - |
| Downspout 10 foot | 10ft.(3m) lengths. May be cut to size for use between elbows. Generally one length required for each story. 2.5" squareDo not cement. | K1602* | - |
| Swing up Outlet | Diverts water further away from building; swings up for mowing etc. Do not cement. | K1702* | - |
| Downspout Joint | To join two lengths of downpipe. Also used for joining downpipe to expansion center drop where there is no overhang (no elbows used) Do not Cement. | K2002* | - |
| Cement Heavy Bodied 5 fl.oz. | Use on surfaces to be permanently "welded". One tube is required for every 100 feet(30.5m). Use Plastmo cement only. 5 fl. oz. (142ccm). | P24000 | - |
| Wedge 4/12 and 6/12 | Compensates for roof pitches: 4/12(3/10) and 6/12(5/10). | K3000* | - |
| Screws 1 inch (20/bag) | #10x1, 20/bag-For mounting brackets and expansion center drop to building. 5/16 Hex #2 robertson and slot drive, plated. | P31000 | - |
| Screws 1.75 inch (20/bag) | For mounting brackets and expansion center drop while using the wedge to compensate for facia angle. 5/16 Hex #2 robertson and slot drive, plated. | K31000 | - |
| Strap Hanger Galvanized | Used in installations without suitable facia boards or rafter tails. Galvanized only. May be painted. Attaches to sheathing and holds Vinyl gutter bracket. | K35000 | - |
| Driplet 2 meter (approx. 6'6") | Use where shingles do not extend over gutter or where shingles are damaged. Overlap ends 2-3" 6'6"(2m) lengths. Do not cement. | P4000* | - |
| Custom Corner | Available in special angles for your individual needs. Send a line drawing to Plastmo and allow 2 weeks for delivery | K4540* | - |
| Other custom fittings | Usually available on request. Send drawing or description. | - | |
| Leafscreen 1.5meter (approx. 5') | Keeps gutter free of leaves. 5 foot (1.5m) lengths. | P2500* | - |
| Leafscreen Support (10/bag) | Holds leaf scren on facia. | P26001 | - |
* designates color 1=white 2=brown
Ship To:
Name Tel:
Street City State Zip
Signature
Check Enclosed
Visa/M.C. # Exp. Date