MATERIAL SAFETY DATA SHEET

PLASTMO EXTRUSIONS

SUPPLER:

PLASTMO LTD.

255 SUMMERLEA RD.

BRAMPTON, ONlARIO L6T4T8 PHONE: (905) 793-9462

PRODUCT: Extrusion Compound Brown, Charcoal (Calcium - Zinc)

Chemical name: Polyvinyl Chloride Compound

HAZARDOUS INGREDIENTS

This is not a WHMIS controlled product.

PHYSICAL DATA

Odour and appearance: odourless powder

Solubility in water: not established

Specific gravity: not established

Melting point: not established

FIRE AND EXPLOSION DATA

Fire extinguishing media: carbon dioxide

Special fire fighting procedures: wear gas mask approved for acid vapours

Hazardous combustion products: burning liberates HCL gas

REACTIVITY DATA

Stability: stable

Incompatibility with other materials:

PVC compounds should avoid contact with acetal or acetal copolymers in elevated temperature processing equipment. The two materials will react in a violent decomposition when mixed under conditions of heat and pressure. Hazardous polymerization: will not occur

TOXICITY DATA

Skin contact: may cause irritation

Ingestion: not known

Inhalation: mav cause irritation

PREVENTIVE MEASURES

Gloves: wear suitable gloves to prevent irritation

Eye protection: Safety glasses

Respiratory: wear a NIOSWMS~4 approved mask

Ventilation: as required for general work areas

Leak, spill procedures: avoid creating dust

Waste disposal: recycle or as per Federal and local regulations

Storage requirements: store in a dry place below 38 C

FIRST AID PROCEDURES

Ingestion: seek medical aid

Inhalation: remove person to fresh air and seek medical aid if necessary

Eye contact: flush with water. Avoid rubbing. If a problem still exists then see a physician.

PREPARATION OF MSDS

Prepared by: E. Uyeno

Date: Oct. 3/95 Revised March 24, 2000

Sources: MSDS's of suppliers