- MATERIAL SAFETY DATA SHEET
- SUPPLIER: PLASTMO LTD.
- 255 SUMMERLEA RD.
- BRAMPTON, ONTARIO L6T 4T8
- PHONE: (905) 793-9462
- PRODUCT: Extrusion Compound (ORGANO TIN stabilized)
- Chemical name: Polyvinyl Chloride Compound
- HAZARDOUS INGREDIENTS
- W.H.M.I.S.-Not Controlled
- PHYSICAL DATA
- Odour and appearance:dry powder with distinct odour
- Solubility in water: not established
- Specific gravity: not established
- Melting point: not established
- FIRE AND EXPLOSION DATA
- Fire extinguishing media: carbon dioxide
- Special fire fighting procedures: wear gas mask approved for acid vapours
- Hazardous combustion products: burning liberates HCL gas
- REACTIVITY DATA
- Stability: stable
- Incompatibility with other materials: PVC compounds should avoid contact
with acetal or acetal copolymers in elevated temperature processing equipment.
The two materials will react in a violent decomposition when mixed under
conditions of heat and pressure. Hazardous polymerization: will not occur
- TOXICITY DATA
- Skin contact: may cause irritation
- No data is available on the metabolism, reproductive effects and
mutagenicity of PVC. Processing of PVC may result in very low concentrations of
unpolymerized vinyl chloride.
- PREVENTIVE MEASURES
- Gloves: wear suitable gloves to prevent irritation
- Eye protection: Safety glasses
- Respiratory: wear a NIOSH/MSHA approved mask
- Ventilation: as required for general work areas
- Leak, spill procedures: avoid creating dust
- Waste disposal: recycle or as per Federal and local regulations
- Storage requirements: store in a dry place below 38 C
- FIRST AID PROCEDURES
- Ingestion: seek medical aid
- Inhalation: remove person to fresh air and seek medical aid if necessary
- Eye contact: flush with water. Avoid rubbing. If a problem still exists
then see a physician.
- PREPARATION OF MSDS
- Prepared: April, 19/99 @ Plastmo Ltd. by E. Uyeno
- Sources: Msds of suppliers
- ADDITIONAL INFORMATION
- Caution! Processing fumes may cause irritation of the eyes and respiratory
tract. Use with adequate ventilation. Avoid breathing process emissions. Dust
can have flammable potential.
- Identification: bundles have green dot sticker
- Return to plastmo.com