K014 — K-Snap Gutter
Sturdy and long-lasting, the K-Snap Gutter is the backbone to Plastmo’s finest rainware system.
10 ft. (3 m) lengths. May be cut to fit any size.
K024 — K-Snap Joint Connector
The K-Snap Joint Connector smoothly fuses gutter sections together to create a leak-free channel for rain runoff.
K034 — K-Snap Expansion Connector
Only needed on long expanses of more than 25 ft. (7.66 m) between corners where there is no downspout, the K-Snap Expansion Connector allows for free expansion of the gutter. 2 K31 screws required.
K044 — K-Snap Outside Corner
K-Snap Outside Corner easily joins gutter sections at the exterior corner of your roof.
K054 — K-Snap Inside Corner
The K-Snap Inside Corner is the pain-free solution to joining gutter sections at the interior corners or your system.
K064 — K-Snap Hanger
Firmly supports gutter sections while allowing for free expansion. Use one K-Snap Hanger for every 24” (61.5 cm) of gutter. Do not cement. 2 K31 screws required.
K084 — K-Snap End Cap
Leaving open ends on your gutter system isn’t a good idea. K-Snap End Caps will ensure the water is directed correctly. End caps also fit onto drop outlets.
System — Ribbed Downspout
Plastmo’s Ribbed Downspout Ribbed System offers a more modern shape that is stronger and thinner.
K104 — K-Snap Drop Outlet Ribbed
K-Snap Drop Outlet Square provides free thermal expansion of the gutter as well as uninterrupted flow of water to your ribbed downspout.
K130 — Ribbed Downspout Elbow
Use the Ribbed Downspout Elbow to bring the downspout from the fascia overhang to the wall. Two are required for each downspout assembly. A third may be used at the base of the downspout to direct rainwater away from your home. Do not cement.
K150 — Ribbed Downspout
Ribbed Downspout is available 10 ft. (3 m) lengths and may be cut to size for use between elbows. Generally one length is required for each story of the home. Do not cement.
K180 — Ribbed Downspout Swing Up Outlet
The versatile Ribbed Downspout Swing Up Outlet diverts rainwater away from your home but also swings up for mowing or other maintenance.
K210 — Ribbed Downspout Connector
Use the Ribbed Downspout Connector to join two lengths of downspout. You can also use to join a length of downspout to the drop outlet where there is no overhang. Do not cement.
K140 — Downspout Bracket
Use two Downspout Brackets for every length of downspout to secure it to the wall.
System — Square Downspout
The most traditional shape option from Plastmo, the Square Downspout System is strong and reliable.
K200 — Square Downspout Connector
Use the Square Downspout Connector to join two lengths of downspout. You can also use to join a length of downspout to the drop outlet where there is no overhang. Do not cement.
K170 — Square Downspout Swing Up Outlet
The versatile Square Downspout Swing Up Outlet diverts rainwater away from your home but also swings up for mowing or other maintenance.
K160 — Square Downspout
Square Downspout is available 10 ft. (3 m) lengths and may be cut to size for use between elbows. Generally one length is required for each story of the home. Do not cement.
K120 — Square Downspout Elbow
Use the Square Downspout Elbow to bring the downspout from the fascia overhang to the wall. Two are required for each downspout assembly. A third may be used at the base of the downspout to direct rainwater away from your home. Do not cement.
K094 — K-Snap Drop Outlet Square
K-Snap Drop Outlet Square provides free thermal expansion of the gutter as well as uninterrupted flow of water to your square downspout.
K140 — Downspout Bracket
Use two Downspout Brackets for every length of downspout to secure it to the wall.
System — Round Downspout
Plastmo’s Round Downspout System is a unique look that efficiently moves rainwater down and away from your home.
P220 — Round Well Cap
The Round Well cap connects to the base of a downspout or well outlet. Used with Well Outlet to cover underground downspout connections and will fit the bell end of underground drain tile. Do not cement.
P210 — Well Outlet
The Well Outlet is recommended for underground downspout connections. May also be used with Round Well Cap to cover underground downspout connections. Do not cement.
P180 — Round Junction 75º
The Round Junction 75º can be used to join two downspouts into one. Do not cement.
P320 — Round Downspout Swing Up Outlet
The versatile Round Downspout Swing Up Outlet diverts rainwater away from your home but also swings up for mowing or other maintenance. Do not cement.
P160 — Round Downspout
Round Downspout is available 10 ft. (3 m) lengths and may be cut to size for use between elbows. Generally one length is required for each story of the home. Do not cement.
P140 — Round Bracket
Use two Round Brackets for every length of downspout to secure it to the wall.
P120 — Round Downspout Elbow
Use the Round Downspout Elbow to bring the downspout from the fascia overhang to the wall. Two are required for each downspout assembly. A third may be used at the base of the downspout to direct rainwater away from your home. Do not cement.
K114 — K-Snap Drop Outlet Round
K-Snap Drop Outlet Square provides free thermal expansion of the gutter as well as uninterrupted flow of water to your round downspout.
P200 — Round Downspout Connector
Use the Round Downspout Connector to join two lengths of downspout. You can also use to join a length of downspout to the drop outlet where there is no overhang. Do not cement.
